We're here to help

    BioSig-ID Enrollment with Photo-ID Check (Electronic and Selfie)

    Follow

    The steps to go through an electronic photo-ID check with a mobile device, as part of the BioSig-ID™ enrollment process, are as follows:

    1. Launch the enrollment process for BioSig-ID™ to get to this screen

      BioProof.01.new.png

    2. Select the device that will be used

      BioProof.02.png

    3. Click the `Next` button to proceed

      BioProof.03.png

    4. Draw the first four character/number password for BioSig-ID™

      BioProof.05.new.png

    5. Click the `Next` button to continue

      BioProof.03.png

    6. The first password is always accepted and now it is important to draw it again as close as possible

      attempt_password.png

      IMPORTANT: It is natural to fail the next step if you are having a difficult time to draw the same characters again close enough to your first password. Try using the `Restart` button otherwise to start fresh and draw something else. For example use an `X` or `7` instead of a `0` as lines are easier than circular motions for some users. Another option is to draw smaller and/or slower. Everything you draw will be used to verify, so if you already know that something went wrong use the `Clear` button to redo the step you are at. Touchpad users might want to consider using both hands to allow more control in drawing while holding down the `left` button.



    7. After you are finished drawing it a second time click the `Next` button to continue

    8. To get a proper biometric profile you just have to draw it a third time

      BioSig_5_Pass2.png

    9. After you are finished click the `Next` button to continue

      BioProof.03.png

    10. Your primary password for BioSig-ID™ is now enrolled and it is time to create a secondary profile with Click-ID™

      clickid_stepbystep.png

    11. This is not an actual keyboard, but an image of one to make it easier to remember what points you click on. It is not a problem to create the same password that was used for the BioSig-ID™ profile, or pick something else (bulls eyes will appear after your selection)

      BioProof.11.new.png

    12. After creating the first profile click on the `Next` button to continue

      BioProof.03.png

    13. The first step is always accepted and now it is important to create it again as close as possible

      BioProof.12.png

    14. After you are finished creating it again click the `Next` button to continue

      BioProof.03.png

    15. Now just once more to finish the Click-ID™ enrollment

      BioProof.13.png

    16. Use the `Next` button to continue

      BioProof.03.png

    17. This now brings us to the BioProof-ID™ step to allow electronic verification of your photo-idStep_18_Start.png
    18. You can either enter a text-message-capable phone number or scan the QR code on your mobile device.

    Via Text Message-the message is sent to the number you provide. Click the link in the text message to continue.

    On Your Computer On Your Mobile Device
    Step_19_TextMessage.png Step_19_TextMessage_Device.png

    Via QR Code-Use your installed QR scanner or download one from your app store to scan the code on your computer screen.

    QR_Code_Device.png

    1. When you click on the link in the text message or open the link from the QR code the verification process will begin on the mobile device (w/camera). Click Start on your mobile device.
      On Your Computer On Your Mobile Device
      start_computer.png Start_device.png
    2. Next, you will choose your document, either state-issued driver’s license/identification card or your passport.
      On Your Computer On Your Mobile Device
      start_computer.png choosedocument_mobiledevice.png
    3. For this example, we will use a driver’s license. Click the > next to Driver’s license. Click the + sign next to the front of license to take a picture of the front. Click OK or Retry if you need to retake the image. Click the + sign next to the back of license to take a picture of the back of your license. Follow the onscreen directions on your mobile device. As you add your ID photos the computer screen will reflect each step in the process. Click on ‘Proceed and Verify
         
      DocumentUpload_Computer.png DocumentUpload_Device.png
    4. Next, you will be asked to take a selfie. Click on ‘Proceed’ to capture the selfie. Then Click ‘Verify’ to finish uploading the selfie.
      On Your Computer On Your Mobile Device
      DocumentUpload_Computer.png selfiescreen1.png
    5. Next, you will be asked to complete the final step in the BioSig-ID™ process of validating your password. Validate_Image.png
    6. Draw the password you created one final time and click the `Validate` button to continue.

    validate_button.png

     

    Was this article helpful?
    0 out of 4 found this helpful